Download Oracle Apps R12 12.1.1

Dear Atul

I want to Install R12 on 10g RAC on Linux 64 bit Itanium server. Kindly give the suggestions and Metalink Doc Id. How to Install R12 on 10g RAC

Thanks
Ather Hussain
Dubai

@Ather

Use these three metalink notes

745759.1 Oracle E-Business Suite and Oracle Real Application Clusters Documentation Roadmap
466649.1, Using Oracle 11g Release 1 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12
388577.1 Configuring Oracle Applications Release 12 with 10g R2 RAC

Dear Atul

Thanks for the Doc Id’s, 3 Doc ID 388577.1 I’m not getting.

I worked on R12 and I setup many times RAC on 10g, kindly give me the steps, how to start Installation.

First I have to Install R12 and connect SAN ?

Thanks
Ather Hussain

dear friends,
i want to install oracle release 12(12.1.1) on ms windows server 2003 32 bit. pls guide me step by step with software and other req.

tks
mohammed azam
mohd_azam1972@yahoo.com
mazamaslam@almajalG4s.com

Hi Atul,

I have downloaded R12.1.1 for Win2K3 server.

Went through the Note 761567.1 and found that the setup steps are same as explained by you in your previous post.

Still want your expertise in knowing the pre-installation and post-installation patchs.

Thanks for all your efforts to keep this nobel service active and going.

Rajasekaran.

Hi Atul,

I want to upgrade my EBS from 12.0.4 to 12.1.1

I have my database version 10.2.0.2

Could you please tell me that to upgrade my EBS do I have to upgrade my database version or we can directly upgrade my EBS version to 12.1.1 keeping my database version unchanged.

Thanks in advance.

Bikram

dear atul,
i want to do cloning for my oracle E-business suite release 12.

show me step by step
thanks
regards,

azam

@ Azam,

Use below two metalink notes to clone R12

406982.1 Cloning Oracle Applications Release 12 with Rapid Clone

811715.1 Descriptive Checklist for performing Rapid Clone with 11i/R12

@ Bikram,

As per metalink note 752619.1 Oracle E-Business Suite Release 12.1.1 Maintenance Pack Installation Instructions

12.1.1 is certified with 10.2.0.3 or higher so in order to upgrade apps to 12.1.1 apply database patch 10.2.0.3 on your 10.2.0.2 database

Hi Atul,

I would like to learn oracle apps. 12.1.1 HRMS. Please suggest me which OS is best Windows or Linux.

Please tell me can i install this full apps. through internet.

Hi Atul,

To learn Oracle Apps. myself should buy licene or can i download it for free, please clarify in detaile

@ Maheswaran,
I don’t think you need license to learn but check this

http://www.oracle.com/corporate/pricing/application_licensing_table.pdf

Hi Atul,
I am struggling with the following error for the last 2 months, while trying to install R12 on Linux VM on my laptop with host windows vista.

The following error shows while installing:
Disk platform missmatch.
required platform: Linux
Disks for platform: Solaris

I have downloaded R12 software from Oracle edelivery, and I chose software for Linux x86.
But not sure why it is saying Disks for platform Solaris.

After downloading, created the staging area on a 500G external hard drive Seagate FreeAgent GO.

I am using a new Dell Laptop, model Studio 1555 with 64bit processor. However, I had to choose OS version 32 bit, since 64 bit did not work. The following message showed up when tried to use 64bit:
“Your CPU does not support long mode. Use a 32 bit distribution”

I tried Linux Centos and Red Hat enterprise Linux. Both did not work. Still the log file shows that I am using Solaris.

I am thinking if VMware is the problem, but I see you have successfully installed.

Please let me know if you have any suggestions.
Thank You.
Ranga.

@ Ranga,
Apps Install on Linux VM works for sure.

Two things to check –
1. Either your OS is not Linux-X86
or
2. Software (R12) Disk are not for Linux-X86

From Linux Machine run this

cat /etc/*release*

or Download R12 software one more time for Linux

[…] 1. Oracle Apps R12 software is available at http://edelivery.oracle.com for more on how to download software click here […]

hi my database is 11g i want to upgrade 12.0.4 to 12.1.1 .tell me what step i follow

Regads
danish

Hi,
I am trying to install R12.1.1 on windows. Can I follow the same steps as illustrated for R12.

Thanks & Regards
Ramesh

@ Ramesh, Yes you can use steps mentioned in R12 for R12.1.1 too

Oracle Applications Rapid Install Wizard Install log

>> Using Rapid Wizard Version : 12.1.1.9
>> Install session started : Wed Apr 13 13:37:30 PDT 2011
>> Rapid Wizard source location : F:\startCD\Disk1\rapidwiz
>> Command Line arguments for this run :

=================================================================

Install Session Information

Host Name : oracleebs.localhost.com
Host Operating System : Windows (32-bit)
User running Install : oracle

=================================================================

InstUpgPanel
—————————————

User action : Install Oracle Applications
Install type : Standard Install

Disabling OCM Configuration
InstallPanel
—————————————

User action : Create configuration
Description : Creates a new instance configuration.

PortPanel
————————————

Selected port pool:

Database Port : 1521
RPC Port : 1626
Web SSL Port : 4443
ONS Local Port : 6100
ONS Remote Port : 6200
ONS Request Port : 6500
Web Listener Port : 8000
Active Web Port : 8000
Forms Port : 9000
Metrics Server Data Port : 9100
Metrics Server Request Port : 9200
JTF Fulfillment Server Port : 9300
MSCA Server Port : 10200-10205
MCSA Telnet Server Port : 10200,10202,10204
MSCA Dispatcher Port : 10800
Java Object Cache Port : 12345
OC4J JMS Port Range for Oacore : 23000-23004
OC4J JMS Port Range for Forms : 23500-23504
OC4J JMS Port Range for Home : 24000-24004
OC4J JMS Port Range for Oafm : 24500-24504
OC4J AJP Port Range for Oacore : 21500-21504
OC4J AJP Port Range for Forms : 22000-22004
OC4J AJP Port Range for Home : 22500-22504
OC4J AJP Port Range for Oafm : 25000-25004
OC4J RMI Port Range for Oacore : 20000-20004
OC4J RMI Port Range for Forms : 20500-20504
OC4J RMI Port Range for Home : 21000-21004
OC4J RMI Port Range for Oafm : 25500-25504
DB ONS Local Port : 6300
DB ONS Remote Port : 6400
Oracle Connection Manager Port : 1521
instantiate file:
source : F:\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
instantiate file:
source : F:\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
DBNodePanel
instantiate file:
source : F:\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
instantiate file:
source : F:\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
AppsNodePanel
AllNodesPanel
—————————————-

Service Name: oracleebs
Node Name: _oracleebs
Operating System: _Windows (32-bit)

Service Name: oracleebs
Node Name: _oracleebs
Operating System: _Windows (32-bit)

Writing configuration file to: C:\oracle\VIS\inst\apps\VIS_oracleebs\conf_VIS.txt

Adding ports for Server0_oracleebs
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_oracleebs
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
Writing configuration file to: C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\conf_VIS.txt

Adding ports for Server0_oracleebs
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_oracleebs
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
Setting temp directory to: C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\
instantiate file:
source : F:\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
instantiate file:
source : F:\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
instantiate file:
source : F:\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
instantiate file:
source : F:\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
instantiate file:
source : F:\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_db.xml
instantiate file:
source : F:\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
instantiate file:
source : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
dest : C:\DOCUME~1\oracle\LOCALS~1\Temp4131337\oracleebs_VIS_apps.xml
Port Availability Check :

—————————

— database node ports —

—————————

Database Port available: Port Value = 1521
Database Port Value = 1521…… Available

DB ONS Local Port available: Port Value = 6300
DB ONS Local Port Value = 6300…… Available

DB ONS Remote Port available: Port Value = 6400
DB ONS Remote Port Value = 6400…… Available

— apps node ports —

————————-

RPC Port available: Port Value = 1626
RPC Port Value = 1626…… Available

Web SSL Port available: Port Value = 4443
Web SSL Port Value = 4443…… Available

ONS Local Port available: Port Value = 6100
ONS Local Port Value = 6100…… Available

ONS Remote Port available: Port Value = 6200
ONS Remote Port Value = 6200…… Available

ONS Request Port available: Port Value = 6500
ONS Request Port Value = 6500…… Available

Web Listener Port available: Port Value = 8000
Web Listener Port Value = 8000…… Available

Forms Port available: Port Value = 9000
Forms Port Value = 9000…… Available

Metrics Server Data Port available: Port Value = 9100
Metrics Server Data Port Value = 9100…… Available

Metrics Server Request Port available: Port Value = 9200
Metrics Server Request Port Value = 9200…… Available

JTF Fulfillment Server Port available: Port Value = 9300
JTF Fulfillment Server Port Value = 9300…… Available

MSCA Server Port available: Port Value = 10200
MSCA Server Port available: Port Value = 10201
MSCA Server Port available: Port Value = 10202
MSCA Server Port available: Port Value = 10203
MSCA Server Port available: Port Value = 10204
MSCA Server Port available: Port Value = 10205
MSCA Server Port Value = 10200-10205…… Available

MSCA Dispatcher Port available: Port Value = 10800
MSCA Dispatcher Port Value = 10800…… Available

Java Object Cache Port available: Port Value = 12345
Java Object Cache Port Value = 12345…… Available

OC4J JMS Port Range for Oacore available: Port Value = 23000
OC4J JMS Port Range for Oacore available: Port Value = 23001
OC4J JMS Port Range for Oacore available: Port Value = 23002
OC4J JMS Port Range for Oacore available: Port Value = 23003
OC4J JMS Port Range for Oacore available: Port Value = 23004
OC4J JMS Port Range for Oacore Value = 23000-23004…… Available

OC4J JMS Port Range for Forms available: Port Value = 23500
OC4J JMS Port Range for Forms available: Port Value = 23501
OC4J JMS Port Range for Forms available: Port Value = 23502
OC4J JMS Port Range for Forms available: Port Value = 23503
OC4J JMS Port Range for Forms available: Port Value = 23504
OC4J JMS Port Range for Forms Value = 23500-23504…… Available

OC4J JMS Port Range for Home available: Port Value = 24000
OC4J JMS Port Range for Home available: Port Value = 24001
OC4J JMS Port Range for Home available: Port Value = 24002
OC4J JMS Port Range for Home available: Port Value = 24003
OC4J JMS Port Range for Home available: Port Value = 24004
OC4J JMS Port Range for Home Value = 24000-24004…… Available

OC4J JMS Port Range for Oafm available: Port Value = 24500
OC4J JMS Port Range for Oafm available: Port Value = 24501
OC4J JMS Port Range for Oafm available: Port Value = 24502
OC4J JMS Port Range for Oafm available: Port Value = 24503
OC4J JMS Port Range for Oafm available: Port Value = 24504
OC4J JMS Port Range for Oafm Value = 24500-24504…… Available

OC4J AJP Port Range for Oacore available: Port Value = 21500
OC4J AJP Port Range for Oacore available: Port Value = 21501
OC4J AJP Port Range for Oacore available: Port Value = 21502
OC4J AJP Port Range for Oacore available: Port Value = 21503
OC4J AJP Port Range for Oacore available: Port Value = 21504
OC4J AJP Port Range for Oacore Value = 21500-21504…… Available

OC4J AJP Port Range for Forms available: Port Value = 22000
OC4J AJP Port Range for Forms available: Port Value = 22001
OC4J AJP Port Range for Forms available: Port Value = 22002
OC4J AJP Port Range for Forms available: Port Value = 22003
OC4J AJP Port Range for Forms available: Port Value = 22004
OC4J AJP Port Range for Forms Value = 22000-22004…… Available

OC4J AJP Port Range for Home available: Port Value = 22500
OC4J AJP Port Range for Home available: Port Value = 22501
OC4J AJP Port Range for Home available: Port Value = 22502
OC4J AJP Port Range for Home available: Port Value = 22503
OC4J AJP Port Range for Home available: Port Value = 22504
OC4J AJP Port Range for Home Value = 22500-22504…… Available

OC4J AJP Port Range for Oafm available: Port Value = 25000
OC4J AJP Port Range for Oafm available: Port Value = 25001
OC4J AJP Port Range for Oafm available: Port Value = 25002
OC4J AJP Port Range for Oafm available: Port Value = 25003
OC4J AJP Port Range for Oafm available: Port Value = 25004
OC4J AJP Port Range for Oafm Value = 25000-25004…… Available

OC4J RMI Port Range for Oacore available: Port Value = 20000
OC4J RMI Port Range for Oacore available: Port Value = 20001
OC4J RMI Port Range for Oacore available: Port Value = 20002
OC4J RMI Port Range for Oacore available: Port Value = 20003
OC4J RMI Port Range for Oacore available: Port Value = 20004
OC4J RMI Port Range for Oacore Value = 20000-20004…… Available

OC4J RMI Port Range for Forms available: Port Value = 20500
OC4J RMI Port Range for Forms available: Port Value = 20501
OC4J RMI Port Range for Forms available: Port Value = 20502
OC4J RMI Port Range for Forms available: Port Value = 20503
OC4J RMI Port Range for Forms available: Port Value = 20504
OC4J RMI Port Range for Forms Value = 20500-20504…… Available

OC4J RMI Port Range for Home available: Port Value = 21000
OC4J RMI Port Range for Home available: Port Value = 21001
OC4J RMI Port Range for Home available: Port Value = 21002
OC4J RMI Port Range for Home available: Port Value = 21003
OC4J RMI Port Range for Home available: Port Value = 21004
OC4J RMI Port Range for Home Value = 21000-21004…… Available

OC4J RMI Port Range for Oafm available: Port Value = 25500
OC4J RMI Port Range for Oafm available: Port Value = 25501
OC4J RMI Port Range for Oafm available: Port Value = 25502
OC4J RMI Port Range for Oafm available: Port Value = 25503
OC4J RMI Port Range for Oafm available: Port Value = 25504
OC4J RMI Port Range for Oafm Value = 25500-25504…… Available

OS User and Group Check

————————–

Domain=ORACLEEBS
,Username=oracle
,PC-Name=ORACLEEBS

User belongs to the Administrators Group.

Port Uniqueness Check :

————————-

— database node ports —

—————————

— apps node ports —

————————-

All ports are unique.

File System Check :

———————

— database node mount point —

———————————

Database ORACLE_HOME created:
Mount Point = C:\oracle\VIS\db\tech_st\11.1.0
Database ORACLE_HOME admin folder created:
Mount Point = C:\oracle\VIS\db\tech_st\11.1.0\appsutil
Database ORACLE_HOME temp folder created:
Mount Point = C:\oracle\VIS\db\tech_st\11.1.0\appsutil\temp
Database Install Log Directory created:
Mount Point = C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_oracleebs
Database Install Out Directory created:
Mount Point = C:\oracle\VIS\db\tech_st\11.1.0\appsutil\out\VIS_oracleebs\templbac
Database Install Out Directory available:
Mount Point = C:\oracle\VIS\db\tech_st\11.1.0\appsutil\out\VIS_oracleebs\templbac
OCM configuration target directory created:
Mount Point = C:\oracle\VIS\db\tech_st\11.1.0\appsutil\clone\\
Database System File Directory created:
Mount Point = C:\oracle\VIS\db\apps_st\data
Database Log File Directory available:
Mount Point = C:\oracle\VIS\db\apps_st\data
Database Transaction File Directory available:
Mount Point = C:\oracle\VIS\db\apps_st\data
Database Archive File Directory available:
Mount Point = C:\oracle\VIS\db\apps_st\data
Database OraInventory File Directory created:
Mount Point = c:\temp

— apps node mount point —

——————————-

APPL_TOP created:
Mount Point = C:\oracle\VIS\apps\apps_st\appl
APPL_TOP admin created:
Mount Point = C:\oracle\VIS\apps\apps_st\appl\admin
APPL_TOP mount 2 available:
Mount Point = C:\oracle\VIS\apps\apps_st\appl
APPL_TOP mount 3 available:
Mount Point = C:\oracle\VIS\apps\apps_st\appl
APPL_TOP mount 4 available:
Mount Point = C:\oracle\VIS\apps\apps_st\appl
COMMON_TOP created:
Mount Point = C:\oracle\VIS\apps\apps_st\comn
JAVA_TOP created:
Mount Point = C:\oracle\VIS\apps\apps_st\comn\java\classes
Temp Directory created:
Mount Point = C:\oracle\VIS\inst\apps\VIS_oracleebs\temp
APPL_TOP admin Install Log Directory created:
Mount Point = C:\oracle\VIS\inst\apps\VIS_oracleebs\admin\log
Apps ORACLE_HOME created:
Mount Point = C:\oracle\VIS\apps\tech_st\10.1.3
Tools ORACLE_HOME created:
Mount Point = C:\oracle\VIS\apps\tech_st\10.1.2
OCM configuration target directory created:
Mount Point = C:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\\
OCM configuration target directory created:
Mount Point = C:\oracle\VIS\apps\tech_st\10.1.2\appsutil\clone\\
Apps ORACLE_HOME OraInventory File Directory available:
Mount Point = c:\temp
Tools ORACLE_HOME OraInventory File Directory available:
Mount Point = c:\temp
Writing configuration file to: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\conf_VIS.txt

Adding ports for Server0_oracleebs
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_oracleebs
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
File Space Check :

——————–

— database node space checks —

———————————-

Disk space on system acceptable:
Database ORACLE_HOME = C:\oracle\VIS\db\tech_st\11.1.0
required = 5600.0
actual = 268666.24609375

Disk space on system acceptable:
Database System File Directory = C:\oracle\VIS\db\apps_st\data
required = 20200.0
actual = 263066.24609375

Disk space on system acceptable:
Database Log File Directory = C:\oracle\VIS\db\apps_st\data
required = 950.0
actual = 242866.24609375

Disk space on system acceptable:
Database Transaction File Directory = C:\oracle\VIS\db\apps_st\data
required = 103350.0
actual = 241916.24609375

Disk space on system acceptable:
Database Archive File Directory = C:\oracle\VIS\db\apps_st\data
required = 64500.0
actual = 138566.24609375

— apps node space checks —

——————————–

Disk space on system acceptable:
APPL_TOP = C:\oracle\VIS\apps\apps_st\appl
required = 5800.0
actual = 74066.24609375

Disk space on system acceptable:
APPL_TOP mount 2 = C:\oracle\VIS\apps\apps_st\appl
required = 2800.0
actual = 68266.24609375

Disk space on system acceptable:
APPL_TOP mount 3 = C:\oracle\VIS\apps\apps_st\appl
required = 8400.0
actual = 65466.24609375

Disk space on system acceptable:
APPL_TOP mount 4 = C:\oracle\VIS\apps\apps_st\appl
required = 3100.0
actual = 57066.24609375

Disk space on system acceptable:
COMMON_TOP = C:\oracle\VIS\apps\apps_st\comn
required = 3200.0
actual = 53966.24609375

Disk space on system acceptable:
Apps ORACLE_HOME = C:\oracle\VIS\apps\tech_st\10.1.3
required = 1400.0
actual = 50766.24609375

Disk space on system acceptable:
Tools ORACLE_HOME = C:\oracle\VIS\apps\tech_st\10.1.2
required = 1400.0
actual = 49366.24609375

Disk space on system acceptable:
Temp Directory = C:\oracle\VIS\inst\apps\VIS_oracleebs\temp
required = 1024.0
actual = 47966.24609375

Host/Domain

————-

command: ping -n 1 oracleebs

Pinging oracleebs.localhost.com [10.10.10.10] with 32 bytes of data:

Reply from 10.10.10.10: bytes=32 time<1ms TTL=128

Ping statistics for 10.10.10.10:

Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms

host ping has succeeded

command: ping -n 1 oracleebs.localhost.com

Pinging oracleebs.localhost.com [192.168.1.50] with 32 bytes of data:

Reply from 192.168.1.50: bytes=32 timeecho off
Setting environment for using Microsoft Visual Studio 2008 x86 tools.
/cygdrive/c/WINDOWS/system32/cmd
‘which’ command is available.
/usr/bin/gnumake
‘gnumake’ is available.
/cygdrive/c/VS9/VC/BIN/cl
‘cc’ is available.
/cygdrive/c/VS9/VC/BIN/link
‘link’ is available.
ERRORCODE = 0 ERRORCODE_END

System Utilities Availability test has succeeded

AllNodesPanel
—————————————-

Service Name: oracleebs
Node Name: _oracleebs
Operating System: _Windows (32-bit)

Service Name: oracleebs
Node Name: _oracleebs
Operating System: _Windows (32-bit)

DoInstallPanel – Summary Text
The Rapid Install Wizard will now install the following:

DoInstallPanel – User continued install at warning dialog.

—————————————–

Starting from Rapid Install Full Stage area F:\oraDB\Disk1
Exception thrown in getAllProductIDs. 0
RapidWiz location: F:\startCD\Disk1\rapidwiz
Install Media location: F:\startCD\Disk1
Database ORACLE_HOME: C:\oracle\VIS\db\tech_st\11.1.0
Database SID: VIS
Database Context Name : VIS_oracleebs
Creating DB Context: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml
instantiate file:
source : F:\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml
instantiate file:
source : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml
dest : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml
instantiate file:
source : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml
dest : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml
instantiate file:
source : C:\oracle\VIS\db\tech_st\11.1.0\temp\restart.xml
dest : C:\oracle\VIS\db\tech_st\11.1.0\temp\restart.xml
instantiate file:
source : C:\oracle\VIS\db\tech_st\11.1.0\temp\restart.xml
dest : C:\oracle\VIS\db\tech_st\11.1.0\temp\restart.xml
Exception thrown in getAllProductIDs. 0
RapidWiz location: F:\startCD\Disk1\rapidwiz
Install Media location: F:\startCD\Disk1
APPL_TOP location: C:\oracle\VIS\apps\apps_st\appl
Database SID: VIS
APPL_TOP Context Name : VIS_oracleebs
INST_TOP location: C:\oracle\VIS\inst\apps\VIS_oracleebs
Creating Apps Context: C:\oracle\VIS\inst\apps\VIS_oracleebs\appl\admin\VIS_oracleebs.xml
instantiate file:
source : F:\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\oracle\VIS\inst\apps\VIS_oracleebs\appl\admin\VIS_oracleebs.xml
instantiate file:
source : C:\oracle\VIS\inst\apps\VIS_oracleebs\appl\admin\VIS_oracleebs.xml
dest : C:\oracle\VIS\inst\apps\VIS_oracleebs\appl\admin\VIS_oracleebs.xml
instantiate file:
source : C:\oracle\VIS\inst\apps\VIS_oracleebs\appl\admin\VIS_oracleebs.xml
dest : C:\oracle\VIS\inst\apps\VIS_oracleebs\appl\admin\VIS_oracleebs.xml
instantiate file:
source : C:\oracle\VIS\inst\apps\VIS_oracleebs\temp\restart.xml
dest : C:\oracle\VIS\inst\apps\VIS_oracleebs\temp\restart.xml
instantiate file:
source : C:\oracle\VIS\inst\apps\VIS_oracleebs\temp\restart.xml
dest : C:\oracle\VIS\inst\apps\VIS_oracleebs\temp\restart.xml

Processing DriverFile = F:\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for F:\startCD\Disk1\rapidwiz\template\adridb.drv
Processing DriverFile = F:\startCD\Disk1\rapidwiz\template\adriapps.drv
Running Instantiation Drivers for F:\startCD\Disk1\rapidwiz\template\adriapps.drv
Total number of processes in Current Install 5
Processing DriverFile = F:\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for F:\startCD\Disk1\rapidwiz\template\adridb.drv
Creation of Directory – C:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_oracleebs Succeeded.
instantiate file:
source : F:\startCD\Disk1\rapidwiz\template\adrun11g.cmd
dest : C:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_oracleebs\adrun11g.cmd
backup : C:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_oracleebs\adrun11g.cmd to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\out\VIS_oracleebs\templbac\adrun11g.cmd
instantiate file:
source : F:\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : C:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_oracleebs\adrundb.cmd
backup : C:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_oracleebs\adrundb.cmd to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\out\VIS_oracleebs\templbac\adrundb.cmd
Step 0 of 5

Command: C:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_oracleebs\adrun11g.cmd

Processing Step 1 of 5

Executing: C:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_oracleebs\adrun11g.cmd

F:\startCD\Disk1\rapidwiz>REM

F:\startCD\Disk1\rapidwiz>REM $Header: adrun11g.cmd 120.11 2009/03/11 21:22:03 marderiu noship $

F:\startCD\Disk1\rapidwiz>REM ###############################################################

F:\startCD\Disk1\rapidwiz>REM

F:\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and

F:\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not

F:\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note

F:\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.

F:\startCD\Disk1\rapidwiz>REM

F:\startCD\Disk1\rapidwiz>REM ###############################################################

F:\startCD\Disk1\rapidwiz>REM

F:\startCD\Disk1\rapidwiz>FOR /F “delims==” %a IN (‘DATE /T’) DO (set date=%a )

F:\startCD\Disk1\rapidwiz>(set date=Wed 04/13/2011 )

F:\startCD\Disk1\rapidwiz>FOR /F “delims==” %a IN (‘TIME /T’) DO (set time=%a )

F:\startCD\Disk1\rapidwiz>(set time=01:41 PM )

F:\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 11g RDBMS : Wed 04/13/2011 01:41 PM

STARTED INSTALL PHASE : 11g RDBMS : Wed 04/13/2011 01:41 PM

F:\startCD\Disk1\rapidwiz>SET JRE_PATH=F:\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java

F:\startCD\Disk1\rapidwiz>SET JRE_CP=.;F:\startCD\Disk1\rapidwiz\jlib\java;F:\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;F:\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\share.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar

F:\startCD\Disk1\rapidwiz>SET XML_FILE=C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml

F:\startCD\Disk1\rapidwiz>SET PATH=F:\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\site\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\cygwin\bin

F:\startCD\Disk1\rapidwiz>SET EC=ERRORCODE

F:\startCD\Disk1\rapidwiz>set CMDDIR=F:\startCD\Disk1\rapidwiz

F:\startCD\Disk1\rapidwiz>setlocal enableextensions

F:\startCD\Disk1\rapidwiz>set /P unpw=””

F:\startCD\Disk1\rapidwiz>for /F “usebackq tokens=1,2 delims=/” %i in (‘APPS/APPS’) do set APPSUSER=%i && set APPSPASS=%j

F:\startCD\Disk1\rapidwiz>set APPSUSER=APPS && set APPSPASS=APPS

F:\startCD\Disk1\rapidwiz>IF “5” == “1” (SET THREADS=1 ) ELSE (SET THREADS=1 )

F:\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\oracle\LOCALS~1\Temp

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “runProcess_1”

“runProcess_1”

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM Setting the driver file name

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>SET DRVNAME=gdb111.drv

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM install 11g

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “Statusstring Installing Database Oracle Home”

“Statusstring Installing Database Oracle Home”

C:\DOCUME~1\oracle\LOCALS~1\Temp>F:\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx512M -classpath .;F:\startCD\Disk1\rapidwiz\jlib\java;F:\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;F:\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\share.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.rapidwiz.util.InstantiateFile -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml -d F:\startCD\Disk1\rapidwiz\driver\dbts\driver\gdb111.drv -pwd no_password_here -log C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_oracleebs\dbInstall.log -nthreads 1 -verbose

Enter the location of the CD labeled Oracle Applications Rapid Install – RDBMS Disk 1 :

Checking Disk contents in – F:\startCD\Disk1\rapidwiz
Checking Disk contents in – F:\oraDB\Disk1
Checking Disk contents in – F:\oraDB\Disk1

Unzip Count:105

Processing Disk1….

Processing Disk2….

Processing Disk3….

Processing Disk4….

Processing Disk5….

C:\DOCUME~1\oracle\LOCALS~1\Temp>if 0 == 0 goto :DBINSTALL_OK

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM Copy the database context templates from startCD to Oracle Home

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM Copy Files (for workarounds) into the Shiphome

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “runProcess_2”

“runProcess_2”

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “Statusstring Copying Files to Shiphome…”

“Statusstring Copying Files to Shiphome…”

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “Statusstring Copying the Database Context template file.”;

“Statusstring Copying the Database Context template file.”;

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM Copy Files Section

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM Standard Files

C:\DOCUME~1\oracle\LOCALS~1\Temp>COPY F:\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp C:\oracle\VIS\db\tech_st\11.1.0\appsutil\template

1 file(s) copied.

C:\DOCUME~1\oracle\LOCALS~1\Temp>COPY F:\startCD\Disk1\rapidwiz\etc\adxdbinf.tmp C:\oracle\VIS\db\tech_st\11.1.0\appsutil\template

1 file(s) copied.

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM Workarounds

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “Statusstring End Copying Files to Shiphome.”

“Statusstring End Copying Files to Shiphome.”

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM End Copy Files Section

C:\DOCUME~1\oracle\LOCALS~1\Temp>if 0 == 0 goto :COPYXML_OK

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “runProcess_3”

“runProcess_3”

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM Perform the install time configuration

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “Statusstring Registering Database Technology Stack”

“Statusstring Registering Database Technology Stack”

C:\DOCUME~1\oracle\LOCALS~1\Temp>(echo APPS & echo APPS ) | F:\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;F:\startCD\Disk1\rapidwiz\jlib\java;F:\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;F:\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\share.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml -stage F:\startCD\Disk1\rapidwiz -showProgress -phase reg -nopromptmsg

Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_oracleebs\ApplyDBTechStack_04131359.log

| 0% completed

/ 3% completed

– 3% completed

\ 3% completed

| 3% completed

/ 3% completed

– 3% completed

\ 3% completed

| 3% completed

/ 3% completed

– 3% completed

\ 3% completed

| 3% completed

/ 3% completed

– 3% completed

\ 3% completed

| 3% completed

/ 3% completed

– 3% completed

\ 3% completed

| 3% completed

/ 3% completed

– 3% completed

\ 3% completed

| 3% completed

/ 3% completed

– 3% completed

\ 3% completed

C:\DOCUME~1\oracle\LOCALS~1\Temp>if 0 == 0 goto :TCFG_OK

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “runProcess_4”

“runProcess_4”

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM Perform the instance configuration

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “Statusstring Configuring Database Technology Stack”

“Statusstring Configuring Database Technology Stack”

C:\DOCUME~1\oracle\LOCALS~1\Temp>(echo APPS & echo APPS ) | F:\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;F:\startCD\Disk1\rapidwiz\jlib\java;F:\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;F:\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\share.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml -stage F:\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg

Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_oracleebs\ApplyDBTechStack_04131404.log

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

C:\DOCUME~1\oracle\LOCALS~1\Temp>if 0 == 0 goto :ICFG_OK

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “runProcess_5”

“runProcess_5″

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM Set user to the ORA_DBA group

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>NET LOCALGROUP ORA_DBA /ADD /COMMENT:”Members can connect to the Oracle database as a DBA without a password”

C:\DOCUME~1\oracle\LOCALS~1\Temp>NET LOCALGROUP ORA_DBA ORACLEEBS\oracle /ADD

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “runProcess_6”

“runProcess_6”

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM Install the OracleService

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “Statusstring C:\oracle\VIS\db\tech_st\11.1.0\bin\oradim.exe -NEW -SID VIS”

“Statusstring C:\oracle\VIS\db\tech_st\11.1.0\bin\oradim.exe -NEW -SID VIS”

C:\DOCUME~1\oracle\LOCALS~1\Temp>C:\oracle\VIS\db\tech_st\11.1.0\bin\oradim.exe -NEW -SID VIS

Instance created.

C:\DOCUME~1\oracle\LOCALS~1\Temp>if 0 == 0 goto :INSTSRV_OK

C:\DOCUME~1\oracle\LOCALS~1\Temp>FOR /F “delims==” %a IN (‘DATE /T’) DO (set date=%a )

C:\DOCUME~1\oracle\LOCALS~1\Temp>(set date=Wed 04/13/2011 )

C:\DOCUME~1\oracle\LOCALS~1\Temp>FOR /F “delims==” %a IN (‘TIME /T’) DO (set time=%a )

C:\DOCUME~1\oracle\LOCALS~1\Temp>(set time=02:05 PM )

C:\DOCUME~1\oracle\LOCALS~1\Temp>ECHO FINISHED INSTALL PHASE : 10g RDBMS : Wed 04/13/2011 02:05 PM

FINISHED INSTALL PHASE : 10g RDBMS : Wed 04/13/2011 02:05 PM

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “Database ORACLE_HOME installation succeeded”

“Database ORACLE_HOME installation succeeded”

C:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_oracleebs\adrun11g.cmd has succeeded

Step 1 of 5

Command: C:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_oracleebs\adrundb.cmd

Processing Step 2 of 5

Executing: C:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_oracleebs\adrundb.cmd

F:\startCD\Disk1\rapidwiz>REM

F:\startCD\Disk1\rapidwiz>REM $Header: adrundb.cmd 120.12 2009/01/19 06:29:56 marderiu noship $

F:\startCD\Disk1\rapidwiz>REM ###############################################################

F:\startCD\Disk1\rapidwiz>REM

F:\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and

F:\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not

F:\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note

F:\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.

F:\startCD\Disk1\rapidwiz>REM

F:\startCD\Disk1\rapidwiz>REM ###############################################################

F:\startCD\Disk1\rapidwiz>REM

F:\startCD\Disk1\rapidwiz>FOR /F “delims==” %a IN (‘DATE /T’) DO (set date=%a )

F:\startCD\Disk1\rapidwiz>(set date=Wed 04/13/2011 )

F:\startCD\Disk1\rapidwiz>FOR /F “delims==” %a IN (‘TIME /T’) DO (set time=%a )

F:\startCD\Disk1\rapidwiz>(set time=02:05 PM )

F:\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : DATABASE : Wed 04/13/2011 02:05 PM

STARTED INSTALL PHASE : DATABASE : Wed 04/13/2011 02:05 PM

F:\startCD\Disk1\rapidwiz>SET JRE_PATH=F:\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java

F:\startCD\Disk1\rapidwiz>SET JRE_CP=.;F:\startCD\Disk1\rapidwiz\jlib\java;F:\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;F:\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\share.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar

F:\startCD\Disk1\rapidwiz>SET XML_FILE=\admin\VIS_oracleebs.xml

F:\startCD\Disk1\rapidwiz>SET XML_FILE=C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml

F:\startCD\Disk1\rapidwiz>SET PATH=F:\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\site\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\cygwin\bin

F:\startCD\Disk1\rapidwiz>SET EC=ERRORCODE

F:\startCD\Disk1\rapidwiz>setlocal enableextensions

F:\startCD\Disk1\rapidwiz>set /P unpw=””

F:\startCD\Disk1\rapidwiz>for /F “usebackq tokens=1,2 delims=/” %i in (‘APPS/APPS’) do set APPSUSER=%i && set APPSPASS=%j

F:\startCD\Disk1\rapidwiz>set APPSUSER=APPS && set APPSPASS=APPS

F:\startCD\Disk1\rapidwiz>IF “5” == “1” (SET THREADS=1 ) ELSE (SET THREADS=1 )

F:\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\oracle\LOCALS~1\Temp

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM Display path and classpath settings for logging

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “Setting PATH to – F:\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -”

“Setting PATH to – F:\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -”

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “Setting CLASSPATH to – .;F:\startCD\Disk1\rapidwiz\jlib\java;F:\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;F:\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\share.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar -”

“Setting CLASSPATH to – .;F:\startCD\Disk1\rapidwiz\jlib\java;F:\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;F:\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\share.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar -”

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM These steps only happen when dbseed is not “No Database”

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>if “Vision Demo” == “No Database” goto :NO_DB

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM UPDATE rollback segs in context

C:\DOCUME~1\oracle\LOCALS~1\Temp>if “Vision Demo” == “Fresh Install” goto :FI_DB

C:\DOCUME~1\oracle\LOCALS~1\Temp>set DRVNAME=gvision.drv

C:\DOCUME~1\oracle\LOCALS~1\Temp>if 0 == 0 goto :UPD_RBS_VI_OK

C:\DOCUME~1\oracle\LOCALS~1\Temp>goto :DONE_WITH_RBS

C:\DOCUME~1\oracle\LOCALS~1\Temp>if “FALSE” == “C:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_oracleebs\adrundb.cmd” (if not “FALSE” == “FALSE” (goto :FALSE ) else (goto :runProcess_1 ) )

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “runProcess_1”

“runProcess_1”

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “Statusstring removing unneeded install files”

“Statusstring removing unneeded install files”

C:\DOCUME~1\oracle\LOCALS~1\Temp>del C:\oracle\VIS\db\tech_st\11.1.0/appsutil/template/dbfinfo.lst /f /s

C:\DOCUME~1\oracle\LOCALS~1\Temp>del C:\oracle\VIS\db\tech_st\11.1.0/appsutil/template/adcrdbclone.sql /f /s

C:\DOCUME~1\oracle\LOCALS~1\Temp>del C:\oracle\VIS\db\tech_st\11.1.0/appsutil/template/adcrdb.sh /f /s

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo # 1>C:\oracle\VIS\db\tech_st\11.1.0/dbs/VIS_ifile.ora

C:\DOCUME~1\oracle\LOCALS~1\Temp>F:\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx512M -classpath .;F:\startCD\Disk1\rapidwiz\jlib\java;F:\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;F:\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\share.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.rapidwiz.util.InstantiateFile -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml -d F:\startCD\Disk1\rapidwiz\driver\data\driver\gvision.drv -pwd no_password_here -log C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_oracleebs\ApplyDatabase.log -nthreads 1 -verbose

Enter the location of the CD labeled Oracle Applications Rapid Install – Databases Disk 1 :

Checking Disk contents in – F:\startCD\Disk1\rapidwiz
Checking Disk contents in – F:\oraAppDB\Disk1
Checking Disk contents in – F:\oraAppDB\Disk1

Unzip Count:237

Processing Disk1….

Processing Disk2….

Processing Disk3….

Processing Disk4….

Processing Disk5….

Processing Disk6….

Processing Disk7….

Processing Disk8….

Processing Disk9….

Processing Disk10….

Processing Disk11….

Processing Disk12….

Processing Disk13….

Processing Disk14….

Processing Disk15….

Processing Disk16….

Processing Disk17….

Processing Disk18….

Processing Disk19….

Processing Disk20….

Processing Disk21….

Processing Disk22….

Processing Disk23….

Processing Disk24….

Processing Disk25….

Processing Disk26….

Processing Disk27….

Processing Disk28….

Processing Disk29….

Processing Disk30….

Processing Disk31….

Processing Disk32….

Processing Disk33….

Processing Disk34….

Processing Disk35….

Processing Disk36….

Processing Disk37….

C:\DOCUME~1\oracle\LOCALS~1\Temp>if 0 == 0 goto :INS_DB_OK

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “runProcess_2”

“runProcess_2”

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM Run RapidClone registration step

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “Statusstring Registering Database”

“Statusstring Registering Database”

C:\DOCUME~1\oracle\LOCALS~1\Temp>(echo APPS & echo APPS ) | F:\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;F:\startCD\Disk1\rapidwiz\jlib\java;F:\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;F:\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\share.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDatabase -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml -stage F:\startCD\Disk1\rapidwiz -showProgress -phase reg -nopromptmsg

Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_oracleebs\ApplyDatabase_04140054.log

| 0% completed

C:\DOCUME~1\oracle\LOCALS~1\Temp>if 0 == 0 goto :CLONE_OK

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “runProcess_3”

“runProcess_3”

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM Run RapidClone configuration step

C:\DOCUME~1\oracle\LOCALS~1\Temp>REM

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “Statusstring Configuring Database”

“Statusstring Configuring Database”

C:\DOCUME~1\oracle\LOCALS~1\Temp>(echo APPS & echo APPS ) | F:\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;F:\startCD\Disk1\rapidwiz\jlib\java;F:\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;F:\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\share.jar;F:\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDatabase -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml -stage F:\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg

Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_oracleebs\ApplyDatabase_04140054.log

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed

| 0% completed

/ 0% completed

– 0% completed

\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:

Control file creation failed

C:\DOCUME~1\oracle\LOCALS~1\Temp>if 1 == 0 goto :CFG_OK

C:\DOCUME~1\oracle\LOCALS~1\Temp>echo “Cannot execute configure of database using RapidClone”

“Cannot execute configure of database using RapidClone”

RW-50010: Error: – script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
instantiate file:
source : F:\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml
instantiate file:
source : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml
dest : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml
instantiate file:
source : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml
dest : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml
instantiate file:
source : F:\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\oracle\VIS\inst\apps\VIS_oracleebs\appl\admin\VIS_oracleebs.xml
instantiate file:
source : C:\oracle\VIS\inst\apps\VIS_oracleebs\appl\admin\VIS_oracleebs.xml
dest : C:\oracle\VIS\inst\apps\VIS_oracleebs\appl\admin\VIS_oracleebs.xml
instantiate file:
source : C:\oracle\VIS\inst\apps\VIS_oracleebs\appl\admin\VIS_oracleebs.xml
dest : C:\oracle\VIS\inst\apps\VIS_oracleebs\appl\admin\VIS_oracleebs.xml
instantiate file:
source : F:\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml
instantiate file:
source : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml
dest : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml
instantiate file:
source : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml
dest : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_oracleebs.xml
instantiate file:
source : F:\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\oracle\VIS\inst\apps\VIS_oracleebs\appl\admin\VIS_oracleebs.xml
instantiate file:
source : C:\oracle\VIS\inst\apps\VIS_oracleebs\appl\admin\VIS_oracleebs.xml
dest : C:\oracle\VIS\inst\apps\VIS_oracleebs\appl\admin\VIS_oracleebs.xml
instantiate file:
source : C:\oracle\VIS\inst\apps\VIS_oracleebs\appl\admin\VIS_oracleebs.xml
dest : C:\oracle\VIS\inst\apps\VIS_oracleebs\appl\admin\VIS_oracleebs.xml
Database Availability

———————–

command: cmd.exe /c F:\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd C:\oracle\VIS\db\tech_st\11.1.0\VIS_oracleebs.cmd sqlplus F:\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS

F:\startCD\Disk1\rapidwiz>echo off
Thu 04/14/2011
01:36 AM
ECHO is off.
ECHO is off.
Thu 04/14/2011 01:36 AM
VIS_oracleebs.cmd exiting with status 0
“”
“The environment settings are as follows …”
“”
” ORACLE_HOME : C:\oracle\VIS\db\tech_st\11.1.0″
” ORACLE_SID : ”
” TWO_TASK : ”
” PATH : C:\oracle\VIS\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;C:\Perl\site\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\cygwin\bin”
” LD_LIBRARY_PATH : C:\oracle\VIS\db\tech_st\11.1.0\lib”
“”

SQL*Plus: Release 11.1.0.7.0 – Production on Thu Apr 14 01:36:56 2011

Copyright (c) 1982, 2008, Oracle. All rights reserved.

ERROR:
ORA-12541: TNS:no listener

connect test returning code 1
ERRORCODE = 1 ERRORCODE_END

RW-50011: Error: – Database ORACLE_HOME connection test has returned an error: 1
command: cmd.exe /c F:\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd C:\oracle\VIS\inst\apps\VIS_oracleebs\ora\10.1.2\VIS_oracleebs.cmd sqlplus F:\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS

F:\startCD\Disk1\rapidwiz>echo off
Thu 04/14/2011
01:36 AM
“Cannot find environment file “C:\oracle\VIS\inst\apps\VIS_oracleebs\ora\10.1.2\VIS_oracleebs.cmd””
ERRORCODE = 0 ERRORCODE_END

Apps ORACLE_HOME connection test has succeeded

Configuration Upload

———————-

uploading config file at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\conf_VIS.txt

AppsConfig : ‘config.txt’ uploading…

—————————————————————
ADX Database Utility
—————————————————————

getConnectionUsingAppsJDBCConnector() –>
APPS_JDBC_URL=’null’
Trying to get connection using SID based connect descriptor
getConnection() –>
sDbHost : oracleebs
sDbDomain : localhost.com
sDbPort : 1521
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID…
getConnectionUsingSID() –>
JDBC URL: jdbc:oracle:thin:@oracleebs.localhost.com:1521:VIS
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() –>
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracleebs.localhost.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Failed upload of config file at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\conf_VIS.txt

Environment File

——————

Database ORACLE_HOME environment file passes instantiated variables test:
File = C:\oracle\VIS\db\tech_st\11.1.0\VIS_oracleebs.env

RW-50016: Error: – Apps ORACLE_HOME environment file was not created:
File = C:\oracle\VIS\inst\apps\VIS_oracleebs\ora\10.1.3\VIS_oracleebs.cmd
RW-50016: Error: – iAS ORACLE_HOME environment file was not created:
File = C:\oracle\VIS\inst\apps\VIS_oracleebs\ora\10.1.2\VIS_oracleebs.cmd
RW-50016: Error: – APPL_TOP environment file was not created:
File = C:\oracle\VIS\apps\apps_st\appl\VIS_oracleebs.cmd
RW-50016: Error: – ADOVARS environment file was not created:
File = C:\oracle\VIS\apps\apps_st\appl\admin\adovars.cmd
RW-50016: Error: – APPSCONFIG was not created:
File = C:\oracle\VIS\apps\apps_st\appl\admin\adconfig.txt
DBC File

———-

RW-00023: Error: – DBC file was not created:
File = C:\oracle\VIS\inst\apps\VIS_oracleebs\appl\fnd\12.0.0\secure\VIS.dbc
HTTP

——

checking URL = http://oracleebs.localhost.com:8000

RW-50015: Error: – HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Help Page

———–

checking URL = http://oracleebs.localhost.com:8000/OA_HTML/help

RW-50015: Error: – Help Page is not responding. The service

@ bikashbhowmik

Installation failed because installer was unable to create control file , check installation logs to see why control file creation failed

C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_oracleebs\ApplyDatabase_04140054.log to

\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed

For log file location in R12 check http://onlineappsdba.com/index.php/2007/12/25/oracle-r1212i-log-file-patch-clone-startupshutdown/

I want to upgrade my ebs from 12.0.4 to 12.1.1 and then to 12.1.3.

My db version is 10.2.0.2.0 which I want to get to 11.1.0 or 11.2.0.

Please suggest the sequnce of upgrade to be done and corresponding notes.

Thanks for your help

I am in the process of unzip R12 cds.

While unzipping a cd i am getting
unzip V15638-01_1of3
(APPHRCFG):/u40/TEMP/R12Vison $ Archive: V15638-01_1of3.zip
replace /u08/oradata/R12cds/oraAppDB/dvd.label? [y]es, [n]o, [A]ll, [N]one, [r]ename:

@usestuser

You can either select y or n both are fine

You will get this for 2 files

Hi,
Thanks for quick reply.

It is asking for dvd.label? [y]es, [n]o, [A]ll, [N]one, [r]ename:
for couple files which i am unzipping just not 2.

As you mention i am giving y and continuing with unzip.

is it ok?

Also i am going to install R12 vison as single user(applmgr), will i still need root access to complete install using applmgr?

@ usestuser,
EBS R12 must always be installed from root user. During configuration screen you mention that both database and application tier must be owned by single user applmgr (root user will then start installer and switch to user applmgr internally to configure database and application tier)

I hope this is clear

Hi,

Can you provide me with step by step instruction on the following:
1. Where to download the Oracle R12 Vision e-Business suite for Windows 7?
2. What additional programs other than Oracle will be needed if any?
3. Any other detailed instructions that may not be apparent.

I would like to be able to have a working Oracle R12.X working instance on my desktop to upgrade my skills.

Thanks in advance for you help.

i want to know that after installing how much time it will provide as trail.i am installing it for my education and learning purpose. i have to purchase any license for it or not? hope to see your reply as soon as possible thanks.

Hi Atul,
I need to upgrade my oracle apps R12 from 12.1.1 to 12.1.3 in windows xp through patches which was provided by oracle .
I have installed the oracle apps in Windows xp via VM were.
So, I am requesting you to could you kindly let me know the steps how to upgrade R12 from 12.1.1 to 12.1.3 in windows xp.
Kindly do the needful job.

Thanks & Regards,
V.Anjan

Hi Atul,
I want to install Oracle Apps R12 in my personal PC, How to install Oracle Apps. Please give me full information for these as soon as possible.

I need Vision demo database need to set up for my OBI Apps , what are options to have same.

I have already database set up for OBI apps?

Thanks in Advance.

Hi Atul,

Operating system is Linux and memory 500gb.
Please tell me step for installation of Oracle Apps.

Thanks
Sajal Agarwal

I want to pursue my career in Oracle Apps Technical Consultant. I am looking for a good trainer who can train me.

Hi, guys!
In this post, there is a PL/SQL script that generates the current database environment file.
Also, it contains a good example of an environment file you’d better use for your database.
http://dbpilot.net/2018/01/30/generating-an-enviroment-file-from-pl-sql/